Pricing  effective Feb. 1, 2007


G101 STICK GRIPS
G205/G207 STICK GRIPS

 The modern design G205 and  G207 stick grips use four, flush fitting  pushbutton switches to control one or two   axis electric trim. These SPDT, momentary contact switches are rated at 5 amps. They can be wired directly to Ray Allen trim servos, eliminating the need to wire relays in your trim system when one grip is used. However, if two grips are used, you will need either relays or a switch to transfer the control of trims from one grip to the other.

The grip itself is made of semi-soft UV and oil resistant foam. The upper switch housing is made of nylon with a lightly textured finish. The G205 and G207 grips are 5.25 ”(133 mm) tall. The G1 is 4.75” (121 mm) tall.

The G205 and G207 grips also have a SPDT switch located on the front side of the grip. It is designed to function as a Push-To-Talk (PTT) button. A SPST switch located on the top of the G101 grip can also be used as a PTT button.

All Ray Allen Stick Grips are designed to fit any stick size up to 1” in diameter with the use of spacers. Two spacers are normally included with each grip enabling easy installation on 3/4”, 7/8” and 1” sticks. The stick grips also include pre-cut and stripped 26 gauge teflon insulated 19 strand wire. A die-cut lexan coated label sheet is supplied in the G205 and G207 grips. There are three stick grip models available:
G1 Stick Grip G101 Stick Grip

The basic G101 grip
features a momentary
contact, 50 milliamp,
SPST switch on top
that can be used as
a PTT button.
                                 $33.95		 G5 Stick grip

G205 Stick Grip

The G205 grip has five
functions which include a momentary contact, 50 milliamp, SPST switch on
the front that can be used as a PTT button and 4 pushbutton switches.

$104.95
G7 Stick Grip with pushbuttons G207 Stick Grip

The G207 grip comes
 standard with two
additional momentary
 contact pushbutton
 switches mounted
on top that can be
used for controlling
functions on
avionics, GPS,
autopilot, speed
brake, etc.

$138.95		 G7 Stick Grip with optional toggles G207 continued...

Four different types of
toggle switches (see
below) can be installed
on the G207 grip in place of the pushbutton switches.
G207 Optional Switches

The pushbutton switch has a 1 amp @ 28 VDC rating.
The toggle type switches have a 2 amp @ 28 VDC rating.

Switch 1 = SPDT Pushbutton Switch, momentary contact
Switch 2 = SPDT Toggle Switch, On/Off
Switch 3 = SPDT Toggle Switch, On/Off/On
Switch 4 = SPDT Toggle Switch, momentary contact in one direction, On/Off/On
Switch 5 = SPDT Toggle Switch, momentary contact both directions, On/Off/On

   The above label is included with each G205 and G207.